License: No. #1076712

Baldwin Park Custom Home Regulations & Zoning

Discover what you can build in the City of Baldwin Park. This city guide covers essential Custom Home regulations and zoning laws to help you navigate the process and make informed decisions for your property.

Vaisman Construction Favicon

Key Rules At A Glance

Size and Separation
Additional Requirements

Number of Homes Allowed in Baldwin Park

In Baldwin Park you can build up to one Custom Home (either attached or detached) and one JCustom Home on single-family property.

Multifamily property owners in Baldwin Park may convert at least one Custom Home, and additional Homes not to exceed a maximum number equal to 25% of the existing units out of existing uninhabitable space. Ergo:  

 

  • From 2 to 7 units, you could convert existing uninhabitable space into one Custom Home
  • From 8 to 11 units up to 2 Homes
  • From 12 to 15 units up to 3 Homes
  • And so on.


No more than two detached Homes may be constructed on a multifamily lot in Baldwin Park.

Modern Custom Home on Nashville Street in Los Angeles with open-concept kitchen and dining area.

Custom Home Baldwin Park – Size & Building Constraints

In Baldwin Park, the maximum size of a detached Custom Home depends on the lot size. For lots of 5,000 square feet or smaller, detached Homes are limited to 850 square feet for a 1-bedroom or studio, 1,000 square feet for a 2-bedroom.

 

For lots between 5,001 and 8,000 square feet, detached Homes with any bedroom configuration can be built to a maximum of 1,000 square feet.

 

For lots larger than 8,000 square feet, detatched Homes with any bedroom configuration can be built to a maximum of 1,200 square feet.

In Baldwin Park, the maximum size of an attached Custom Home depends on the lot size. For lots of 5,000 square feet or smaller, attached Homes are limited to 850 square feet for a 1-bedroom or studio, 1,000 square feet for a 2-bedroom.

 

For lots between 5,001 and 8,000 square feet, attached Homes with any bedroom configuration can be built to a maximum of 1,000 square feet.

 

For lots larger than 8,000 square feet, attached Homes with any bedroom configuration can be built to a maximum of 1,200 square feet.

In Baldwin Park, attached and detached Homes are limited in height to 18 feet.

An attached Custom Home may be two stories in Baldwin Park. However, due to height restrictions you cannot build a two-story detached Custom Home in Baldwin Park.

No, stacked Homes (one Custom Home on each floor of a two-story structure) are not allowed in Baldwin Park.

No, two Homes attached together are not allowed in Baldwin Park.

No, a JCustom Home is defined as A Custom Home converted from existing space within the main structure of the primary dwelling unit. As such, it cannot be attached to A Custom Home.

Roof decks are not prohibited for Homes in Baldwin Park. However, California building safety codes about roof deck safety railings apply, and the height of the railing applies to the total height of the building, so the whole structure including the railings must comply with Custom Home height requirements. California requires that deck rails be 36 inches high on residential dwellings, 42 inches high on multifamily dwellings.

The exterior of the Custom Home must align with the architectural and aesthetic style of the rest of the neighborhood, using similar materials and design elements to maintain consistency with the main dwelling unit and surrounding dwellings.

Custom Home Gallery 4

Custom Home Setbacks in Baldwin Park

The City of Baldwin Park requires 4-foot rear and side setbacks for new-construction Homes. Homes converted from existing structures may be exempt.

The City of Baldwin Park requires a minimum of 6 feet of separation between the new Custom Home and any other structures. Homes converted from existing structures may be exempt.

No, Homes are not allowed in the front yard of residential property in Baldwin Park.

Additional Requirements in Baldwin Park

Baldwin Park prefers in-person submission. However, you can contact the Baldwin Park Planning Department to make other arrangements if in-person submission is impossible.

Baldwin Park may require a soils report for Custom Home permitting to make sure the soil can support the new structure, especially if the Custom Home will be located on a hillside, an area with significant grading, or if there are special foundation requirements.

While not setting a percentage, Baldwin Park requires that property maintain “sufficient” open and permeable space on the lot. 

The plan check requires a review by the Planning Department and the Department of Building & Safety for zoning, building standards, and safety compliance. The process takes approximately 4-6 weeks.

Parking for Baldwin Park Custom Home

Baldwin Park typically requires one additional parking spot per Custom Home be added to the property. However, if the property is located within a half-mile of a public transit stop, it may be exempt from this requirement. Homes converted from an existing garage or carport are also exempt from this parking requirement.

If a parking space must be added, it can be included on the driveway or configured as tandem parking.

Revere Pl - Culver City 1

Additional City of Baldwin Park Custom Home Regulation Resources

Per Title 24 of the California Energy Code, solar panels of appropriate size and capacity are mandatory on new-construction Homes. Homes built from converted existing structures are exempt, as may be Homes located under significant shading. Smaller Homes may be subject to reduced or modified solar panel requirements.

A Custom Home is not required to have a separate water or electrical meter. You can opt for the Custom Home to share service with the main dwelling unit. However, you can request separate water or electrical meters from the City of Baldwin Park.

Baldwin Park does not automatically assign a new Custom Home its own address. However, it may assign the Custom Home a new address if it is intended for rental or independent occupancy. The Custom Home will usually get a “½” designation — for example, A Custom Home located behind 1234 Pine Street would have the address “1234½ Pine Street.”

Low Impact Development (LID) is an approach to land development or redevelopment that seeks to preserve and conserve onsite water quality and natural features, with minimal detrimental effect to local waterways and ecosystems. Baldwin Park may require LID fees for larger Homes.

No, Baldwin Park does not allow residents to use A Custom Home as an Airbnb or short-term rental (30 days or less).

Per the Costa-Hawkins Act of 1995, Baldwin Park does not impose rent control on dwellings constructed after February 1, 1995. This means most new-build Homes are exempt. However, if the primary dwelling unit is subject to rent control, it might apply to the Custom Home as well.

While encouraging the use of electric appliances for efficiency and sustainability, Baldwin Park does not prohibit gas appliances in new Homes.

In Baldwin Park you are only required to install sprinklers in a new Custom Home if the primary dwelling unit has them as well. You may also be required to install them if the Custom Home is located within a special fire hazard zone.

Have Additional Questions?

Visit our comprehensive FAQ page for more information.